| Info |
|---|
This is a short how-to manual for end customers using the CRANCHI Connected-it-Boat service www.connect-it-boat.com You need help or have any questions? Please follow the link to contact our support for end customers. |
...
Click on the picture to select your own photo of your boat
Rename your boat
Add an email where you want to receive the alerts
Add a minimum main battery voltage in millivolts. If the main battery voltage falls below this limit, you will receive an email if you activate the alert.
Add a second battery battery voltage in millivolts. If the second battery voltage falls below this limit, you will receive an email if you activate the alert.
Status / Alerts
...
Location
… shows the current status of your device
Alarms
Here you can switch ON or OFF alerts.
GPS Movement Protection:
if you activate the alert, the last position is stored. If the device sends a new position that is more than 250m away from the last stored position, it triggers alert and the alert is de-activated. You must activate the GPS Movement Protection again to store a new location that will be used for the next movement.
Ignition ON: triggers alert if input for ignition is turned on.
Bilge Pump ON: triggers alert if input for Bilge pump is turned on
Battery Voltage Low: if voltage was good and then drops under the limit, the alert is turned on.
Secondary Voltage Low: if voltage was good and then drops under the limit, the alert is turned on.