| Info |
|---|
This is a short how-to manual for end customers using the CRANCHI Connected-it-Boat service www.connect-it-boat.com |
| Table of Contents |
|---|
How to connect your Connected-it Boat Device
⚠️ Important safetey instructions
Before beginning the installation of your product, qualified personnel (skilled in electronic/electrical installation) must read completely this guideline. Important information contained herein is to prevent danger and damages of the used product or vehicle.
The device must be connected only by qualified individuals.
Installation individuals must use right fuses.
We are not liable for any damages or errors that occur due to following this installation manual.
Do not disassemble the device. Do not touch before unplugging the power supply if the device is damaged, the power supply cables are not isolated or the isolation is damaged.
Warning!! May explode, if wrong accumulator is used.
Any installation and/or handling during a lightning storm is prohibited.
All installations have to be completed with a function test with the software if all signals are received.
🛰️ Mounting Positions for GPS
It is necessary that the label of the device is facing towards sky.
The device can be mounted under the dashboard, but not under metal!
Too many wirings or distoring signals can weaken the GPS reception.
As any electrical device the tracking unit is susceptible to humidity or too much heat.
Device description
...
👨🔧 Device wiring instructions
...
| Warning |
|---|
If you have an older device or different device model, other wiring colours will apply. |
Installation test
Use the software to check if all connected inputs show data, switch ignition and bilge pump on and wait for the data to be received in the software.
...
How to use the Software
Login to Software
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
First, you need to open login page to our web-based software. The software is running in a browser, on your smartphone or on any PC, so you don’t need to download any app. |
...
if you activate the alert, the last position is stored. If the device sends a new position that is more than 250m away from the last stored position, it triggers alert and the alert is de-activated. After receiving the alert you must re-activate the GPS Movement Protection again to store a new location that will be used for the next movement.
...
⏰Ignition ON: triggers alert if input for ignition is turned on.
...
And you can use the history to show past data.
...
Contact to support
| Info |
|---|
You have read the manual carefully and still you need help or have any questions? Please follow the link to contact our support for end customers. |
If you don’t find your USERNAME and PASSWORD, please contact our support.
If you must extend the service contract, please contact our support.