Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • A white background was added to the asset text in the map to read it easier.
  • The new setting "Show as stopped time (min) changes the asset colour in the asset list from
  • In the Options>GUI1 you can add the temperature values of the ibutton temperature sensor 1, 2 or 3 to the logbook report. The start temperature (ST), end temperature (ET) and average temperature (AT) are shown.

  • There are 2 new speed filters to reduce alerts with lower speeds:
    • You can configure a minimu speed for the movement alert (e.g. 30 km/h) so that the movement alert is only triggered if the asset is moved without ignition AND speed above 30 km/h. This speed filter reduces alerts if devices record short movements (e.g. 1 or 2 km/h)
    • The driver alarm minimum speed is used to filter wrong driver alerts below 20 km/h. This is necessary if the trip starts before the driver can sign in using this driver identification.
  • Image Added
  • The Digital Input report got a new counter coloumn that counts the number of events:
  • Image Added

New Features for IOT Sensors

...