| Info |
|---|
This is a short how-to manual for end customers using the Connected-it-Boat service www.connect-it-boat.com |
...
Before beginning the installation of your product, qualified personnel (skilled in electronic/electrical installation) must read completely this guideline. Important information contained herein is to prevent danger and damages of the used product or vehicle.
The device must be connected only by qualified individuals.
Installation individuals must use right fuses.
We are not liable for any damages or errors that occur due to following this installation manual.
Do not disassemble the device. Do not touch before unplugging the power supply if the device is damaged, the power supply cables are not isolated or the isolation is damaged.
Warning!! May explode, if wrong accumulator is used.
Any installation and/or handling during a lightning storm is prohibited.
All installations have to be completed with a function test with the software if all signals are received.
...
Enter your USERNAME and PASSWORD as shown below and click LOGIN
...
The next page will ask you to choose your own password (it must contain special characters). Change password, done! You are in!
...
if you activate the alert, the last position is stored. If the device sends a new position that is more than 250m away from the last stored position, it triggers alert and the alert is de-activated. After receiving the alert you must re-activate the GPS Movement Protection again to store a new location that will be used for the next movement.
...
⏰Ignition ON: triggers alert if input for ignition is turned on.
...