...
- Connecting the RS232 cable with the spreader display as per the installation manual, testing if you receive the full set of data.
- Contact us for price information about this module.
Current state
The last/most current data set with winter service spreading data is displayed.
...
- Choose the right asset and date in the header and click on the refresh symbol.
- Download the data to Excel/PDF
- Use the turn page arrows in the footer to jump to other pages
- Click on a row to show the position in a map
- Double click on the row to open the Spreading Protocol.
In the coloumn header settings you can (de-)select which fields you want to add or remove to the table. The table view shall be stored in the footer. We recommend to work with less coloumns vor a better overview.
Spreading Protocol
The Spreading Protocol summarizes the the spreading data in a daily report.
The spreading amount can be assigned to geofence areas. Data outside of geofence areas will be shown in the area "others".
The spreading data can be assigned to different street names.
The following report shows the spreading data for each 1000 or 5000 meters (refer to options/administration) OR if there is a change in the spreading data (change of dosage) OR if a geofence area is entered or left.
Driver view for the spreading protocols via email and smartphone app
The driver receives the daily spreading protocol via email, if an email adress is entered for the driver. The driver must be assigned to the asset with the spreader.
The driver can login to the GPS Fleet Software app using his driver name and driver password. In the GPS Fleet Software he can view the spreading protocols and add a comment (data OK, data false).
The driver feedback is shown in the protocol table in the software.
.
Winter service & tour planning
Geofence Instructions
If necessary, create a geofence: Draw a geofence, fill in the name and winter service tab:
| function | Details |
|---|---|
Active | will be checked during inspection |
| Standart Green Time | when Geofence is automatically displayed green |
| Geofence Visittime | Time before the creation time of the "Geofence Work Verification" report |
| Min. time in Geofence with ignition on, with work signal on, Min. distancein geofence | Values that must be achieved for the work to be considered completed |
| Allow manual closing | If there is no GPS signal, Geofence can be marked as completed by the "3.3" app |
Open the geofence, fill in the "Instructions" tab with instructions ( driving information, hazard warnings, documentation requirements, etc.) :
Add a picture if necessary.
Create tour plan and send to the driver as PDF
You can create a tour by setting a geofence as stops. To do this, you first need to create a tour and then press "i". After that, you can add geofence stops on the right side. The order of the stops can be changed by simply dragging and dropping.
To create a PDF guide for the driver, you need to click on "..." - "Tour Instructions". All geofence instructions will be included in the tour:
The instructions can then be sent by email by clicking the “Send Email” button:
