Content Comparison

If you have troubles during the installation, your workshop shall contact our support via phone.

Contact to our technical support

GPS Installation Smartphone-App

There is a new smartphone app for workshop and customers that want to install and test GPS tracking devices.

Image Removed

...

...

https://proddataserver.sw-management.at/BoxServer/ws/login

Start screen of the GPS Installation App:

...

The one-time password is valid for one asset, one customer-account or all devices of a partner.Image Removed

...

Search for devices

Enter the IMEI or part of the IMEI or the asset name below and click on search.

Image RemovedImage Added

Check the test data

...

Check the GPS Installation App test data:

1. The time mustbe correct

2. DI1 must be checked, if you activate the ignition and unchecked, if you swith off the ignition

3. Address and position must be correct

4. e.g. DI2 must show the state of other connected senosts

5. the field ibutton input must contain the of the driver

...

Checklist for fixed Installations

Mandatory (absolutely necessary):

• Before beginning the installation of your product, qualified personnel (skilled in electronic/electrical installation) must read completely this guideline (absolutely necessary)

• Check the correct position of the GPS Antenne (absolutely necessary)

• Check, if the device has permanent power (absolutely necessary)

• Check, that ground is connected correkly (absolutely necessary)

• Check that the ignition is connected correctly (absolutely necessary)

• Do a short testtrip and check if the trip data is sent to the test software(absolutely necessary)

...

• private switch is connected and tested

• driver identification is connected and tested

• the buzzer - driver identification is working according the customers configuration

Documentation

After finishing your installation and tests you should send a Installation document to your customer/partner.

Image RemovedImage Added