...
- A white background was added to the asset text in the map to read it easier.
- The new setting "Show as stopped time (min) changes the asset colour in the asset list from
- In the Options>GUI1 you can add the temperature values of the ibutton temperature sensor 1, 2 or 3 to the logbook report. The start temperature (ST), end temperature (ET) and average temperature (AT) are shown.
- There are 2 new speed filters to reduce alerts with lower speeds:
- You can configure a minimu speed for the movement alert (e.g. 30 km/h) so that the movement alert is only triggered if the asset is moved without ignition AND speed above 30 km/h. This speed filter reduces alerts if devices record short movements (e.g. 1 or 2 km/h)
- The driver alarm minimum speed is used to filter wrong driver alerts below 20 km/h. This is necessary if the trip starts before the driver can sign in using this driver identification.
- The Digital Input report got a new counter coloumn that counts the number of events:
New Features for IOT Sensors
...
| Feature | Description |
|---|---|
| h in cm | Height of the tank |
| x in cm | Distance between tank bottom and sensor |
| x offset in cm | How many cm does the sensor stick out the full tank (highest level)? |
| Min. Alarm | Type of alert (report, email, sms...) Beta-Test-Feature for future use |
| Min. Value (%) | Lower values will trigger an alert |
| Min. Restriction | Alert only within the restricted times Beta-Test-Feature for future use |
| Max. Alarm | Type of alert (report, email, sms...) Beta-Test-Feature for future use |
| Max. Wert (%) | Higher values will trigger an alert |
| Max. Restriction | Alert only within the restricted times Beta-Test-Feature for future use |
Value 1 Liter (l) Max. Liter | How many liters does the full tank contain (100%) |
| Tank shape | Rectangle Fuel tank oder round (see image below) |
Value 2 tons / kgs
| Which weight does the full tank have ? |
| Unit | unit for weight |
| Dimensions | Pre-configured fuel tanks |
| Salzmanager | Checkbox YES for data forwarding |
Further fixes:
- Canbus Fuel Level Alarm was improved
- Asset configuration > Logbook: the feature "Delete short waiting times" was improved, short stops will be ignored in the logbook report. This feature has no effect on the rawdata.
- Asset configuration > Logbook:the feature "" was added to insert a stop in the logbook even if a device is sending short movements (less than 10 meter) during stops with ignition on. This feature has no effect on the rawdata.
- CANBUS data from FMS and LVCAN adapter have been improved in the history raw data excel