Version 3.8.53 (Dec 15, 2020)

The new map mode for Leaflet can be activated by our support.

• Assets are summed up to "clusters" to avoid an overfull map with many assets on the same location.
• You can draw new geofences using the new symbols in the map

• You can use the Asset Detail View to jump directly to editing the asset or the driver

• New geofence mode to better load a lot of geofences
• New mode to use geofences only for the logbook
• New map symbols to draw geofences

In the detail view of the idle times you can show the duration of the additional inputs.

• The customer account can be set to CANBUS calibration by our support. In this case all distances will be calculated using CANBUS values.
  • General = no selection => all assets' logbook distances are calculated based on CANBUS total mileage (1x per kilometer, jumps are possible)
  • CAN Advanced Mode 2 (daily cali): the distance is calculated based on GPS distance and once per day a new CANBUS Total Mileage value is used to set the total calibration.
  • No CAN Calibration (Mode 2): the logbook distance will be calculated based on GPS without CAN calibration

• Security for SQL was updated
• Security for role-based users was updated

• For operator users and manager users you can set individual user rights.
• Operators can be also assigned to groups using chargeable groups.

A new mode for device-side driver identification can be activated by the support. Please note that this might require a configuration update.

• The new driver identification mode turns the buzzer ON when ignition is started until the driver uses his driver ID to identify.
• A new driver identification is only required...
  • in the "Pool" car mode after a stop with ignition off for more than 10 minutes
  • in the "Daily Login" mode after a stop with ignition off for more than 10 hours
  • in the "Temporary" pool or daily login mode the next start requires an identification, then the system changes to "fix", daily or pool.
  • in the "Fix" mode there will be no new required identification, the last identification is used.

• The lists for email and SMS can be hidden and deactivated by our support

• • You can hide private times in the Monthly Overview 
  • You can hide the adress if alerts are generated for assets with private switch

• There are a lot of new data fields for assets:

• A new pulldown for customer car category was added where admin users can create new list elements (refer to options)
• Chargeable groups can be used to summarize billing data reports
• The Login mode can be altered using Actions > Login
• The additional fields can be shown in the dynamic report view and the "Asset Data" report.

• The driver list in the asset configuration has got a new search function below.

• If you search and find a new driver name, it is automatically enabled as "allowed driver" in the above list.
• The new inputs "Bluelight" will generate an automatic comment in the logbook.

• Am Fahrzeug Reiter Erweitert kann eingestellt werden, dass Fahrzeuge nicht in der Fahrzeugliste angezeigt werden
• Am Fahrzeug Reiter Erweitert kann eingestellt werden, dass Fahrzeuge nicht in der Landkarte angezeigt werden

Es ist möglich, nach x Tagen die Geschwindigkeit von Fahrzeugen auf einen Standardwert zu setzen (einstellbar vom Support). Dadurch werden die tatsächlichen Geschwindigkeiten nicht mehr angezeigt.