This is a short how-to manual for end customers using the Connected-it-Boat service www.connect-it-boat.com

Open

How to connect your Connected-it Boat Device

Important Safetey instructions

• Before beginning the installation of your product, qualified personnel (skilled in electronic/electrical installation) must read completely this guideline. Important information contained herein is to prevent danger and damages of the used product or vehicle.

• The device must be connected only by qualified individuals.

• Installation individuals must use right fuses.

• We are not liable for any damages or errors that occur due to following this installation manual.

• Do not disassemble the device. Do not touch before unplugging the power supply if the device is damaged, the power supply cables are not isolated or the isolation is damaged.

• Warning!! May explode, if wrong accumulator is used.

• Any installation and/or handling during a lightning storm is prohibited.

• All installations have to be completed with a function test with the software if all signals are received.

Mounting Positions for GPS

• It is necessary that the label of the device is facing towards sky.

• The device can be mounted under the dashboard, but not under metal!

• Too many wirings or distoring signals can weaken the GPS reception.

• As any electrical device the tracking unit is susceptible to humidity or too much heat.

Device description

Open

Device wiring instructions

Installation test

Use the software to check if all connected inputs show data, switch ignition and bilge pump on and wait for the data to be received in the software.

How to use the Software

Login to Software

This is the Login web-page (for your smartphone or PC):

https://cranchi.sw-management.at/GFS/

You can use the QR Code below to directly open the login on a smartphone:

Customer Login Details

Enter your USERNAME and PASSWORD as shown below and click LOGIN

The next page will ask you to choose your own password (it must contain special characters). Change password, done! You are in!

Activating alerts on your iPhone

You must add the web-link in to your iPhone Home Screen to receive push-notifications on your smartphone!

While viewing the website, tap in the menu bar, scroll down the list of options, then tap
Add to Home Screen.

Activating alerts on your Android smartphone

You must add the web-link in to your android Home Screen to receive push-notifications on your smartphone!

Enable Push Notifications

After installing application on your smartphone’s home screen you must click on the user settings to “enable push notifications”

Live Data View

Use the Action Buttons to view the boat information or to view the current location and last trips.

The Live Data View will show the boat’s name, followed by location and latest timestamp of the location.

You can use the icons below to open the data, current gps position and gps tracks.

General Data

• Click on the picture to select your own photo of your boat

• Rename your boat

• Add an email where you want to receive the alerts

• Add a minimum main battery voltage in millivolts. If the main battery voltage falls below this limit, you will receive an email if you activate the alert.

• Add a second battery battery voltage in millivolts. If the second battery voltage falls below this limit, you will receive an email if you activate the alert.

Status / Alerts

Location

… shows the current status of your device.

You can select different map views.

Alarms

GPS Movement Protection:

if you activate the alert, the last position is stored. If the device sends a new position that is more than 250m away from the last stored position, it triggers alert and the alert is de-activated. After receiving the alert you must re-activate the GPS Movement Protection again to store a new location that will be used for the next movement.

Ignition ON: triggers alert if input for ignition is turned on.

Bilge Pump ON: triggers alert if input for Bilge pump is turned on

Battery Voltage Low: if voltage was good and then drops under the limit, the alert is turned on.

Secondary Voltage Low: if voltage was good and then drops under the limit, the alert is turned on.

Ignition / Speed / Voltages

Graphs will show the data over time. You can check the status of the voltage for the main battery and the 2nd battery.

GPS Positions and History track

You can use the GPS icon and GPS History icon to show the latest GPS position and the last tracks.

You can change the map style to show satellite map pictures (if available)

And you can use the history to show past data.

Contact to support

E-mail support: support.cib@t-matix.com

Support via phone or WhatsApp +43 676 3808976

If you don’t find your USERNAME and PASSWORD, please contact our support.

If you must extend the service contract, please contact our support.